Seite 4 von 5

Re: Model-4CLF Cresta Bianca

Verfasst: 10.09.2012 - 19:56
von Mr.MarcoPelle
Just added a small "widget" to valley station :tongue:

Bild

Now I will start work at the mountain station. I've got a good project in my mind.

Re: Model-4CLF Cresta Bianca

Verfasst: 10.09.2012 - 20:27
von 4CLD_Gampebahn
Looks very Nice Marco =)
When I see your Maintance Cabin i remember that i Should Build a new one for my T-Barlifts :)

I´m very glad to see Photos of the Uper Station too.

Greetings Jochen

Re: Model-4CLF Cresta Bianca

Verfasst: 11.09.2012 - 10:15
von Mr.MarcoPelle
Many thanks Jochen :D
Here is the project, unlucky I will have only few free time now, because school will start tomorrow :tot:

Bild

Re: Model-4CLF Cresta Bianca

Verfasst: 11.09.2012 - 18:57
von Dieseltom
Non piangere Marco. Scuola e importante per la Vita e per futura. Eccho! Grande Funivia la Cresta Bianca! Ciao adesso ! Tommaso! :ja: :ja: :ja: :ja:

Re: Model-4CLF Cresta Bianca

Verfasst: 14.09.2012 - 15:23
von Mr.MarcoPelle
Thanks DieselTOm, lucky I always find some free time for my model.
Just a photo-news:

Bild

Re: Model-4CLF Cresta Bianca

Verfasst: 14.09.2012 - 15:39
von Seilbahn123
Is this the "Stationssteher" (how is it called in english?? :( ;( ) If yes, then it will be very stable.

Re: Model-4CLF Cresta Bianca

Verfasst: 14.09.2012 - 15:52
von Mr.MarcoPelle
I don't know, but it's the cement's plinth. It's very well built with four M4 bars in the it.

Re: Model-4CLF Cresta Bianca

Verfasst: 14.09.2012 - 18:01
von Dieseltom
Il fundamento terrazza per la stazione ? , Funivia 123 non capisce come se dice fundamento terrazza in englese......." . Saluti da Tommaso. :D :D :D

Re: Model-4CLF Cresta Bianca

Verfasst: 14.09.2012 - 18:15
von Mr.MarcoPelle
Yes, it's "fondamenta per stazione" :D

Re: Model-4CLF Cresta Bianca

Verfasst: 20.09.2012 - 20:11
von Mr.MarcoPelle
Upper station grows slowly... :)

Bild

Re: Model-4CLF Cresta Bianca

Verfasst: 04.11.2012 - 20:12
von Mr.MarcoPelle
Hi to all, mountain station is quite finished, I added all leds and they work fine (I posted some pictures about on FaceBook). But I have to change pulleys with bigger new ones. So I will have to modify some parts at supportowers.
I also re-solded some parts at the maintenance basket and I added the two meshes:

Bild

Bild

Re: Model-4CLF Cresta Bianca

Verfasst: 04.11.2012 - 20:52
von Petz
Nice pictures and the tablet for the tools and replacement parts looks great.

Re: Model-4CLF Cresta Bianca

Verfasst: 31.12.2012 - 12:40
von Mr.MarcoPelle
Hi guys!
I have some news for you.

I haven't got photos from the model, but I'd like to show you the new piece which I built yesterday. It is a double effect sheave batteries, it works great, like reals. It works with JC models too ;D

Bild

Bild

The model's track will have got 5 towers with sheaves batteries of 4,6 and 8 wheels each + the double effect which you have just seen. Quite all sheaves batteries are already ready to run and they works great too.
Towers will be in brass (thanks Markus ;D ) with many partculaurs. The tower which you have just seen is still the old one in aluminium.

Stations are a bit evoluted from last photos and I will take some photos when my table will be much more clean than now :mrgreen: :mrgreen:

So I wish you a happy new year 2013! :freude: :freude: :bia: :bia:

Re: Model-4CLF Cresta Bianca

Verfasst: 31.12.2012 - 14:21
von Ram-Brand
Nice! Happy new year. :)

Re: Model-4CLF Cresta Bianca

Verfasst: 31.12.2012 - 17:54
von Lifteler
Wow.That looks great :D

Re: Model-4CLF Cresta Bianca

Verfasst: 31.12.2012 - 19:30
von Petz
Whow; you are the first model lift builder who starts with spring double sheave batteries :!:
Looks good and i´m sure it has a proper function too...:ja:

Re: Model-4CLF Cresta Bianca

Verfasst: 01.01.2013 - 12:09
von Mr.MarcoPelle
I'm glad to know that you like it. :ja: I'm not the first who has built double effect sheaves batteries with springs: I'm the third after two french model builder.
Springs come from pens and I'm not sure if they are the best ones (rust)... :rolleyes: They are 4mm of diameter with a M3 bar inside them.

Re: Model-4CLF Cresta Bianca

Verfasst: 01.01.2013 - 21:34
von Petz
Unfortunately i have not the time to visit RMN often so i didn´ know that two of the guys there had built double sheave batteries. Unfortunately rust could be a theme cause all the pen´s springs that i know are not protected against it so so the best would be to put some grease on it.

Re: Model-4CLF Cresta Bianca

Verfasst: 16.03.2013 - 14:20
von Mr.MarcoPelle
Hi guys!

Well, I am finally here to show some interesting (I hope for you too) news. I don't want to write all the new parts and things, or it will become a very long post :tongue: I just want to say that there are automatic gates at the valley station! Support towers will be changed soon (I hope) with new ones much more good.

Valley station:

Bild

Bild

Bild

Bild

Up station:

Bild

Bild

Bild

I will change my house next week. The 4CLF will stay on the new balcony, under the snow during winter! :ja:

Re: Model-4CLF Cresta Bianca

Verfasst: 16.03.2013 - 14:44
von Petz
Your new additions looking pretty nice, but i think we had to tell the guys that the gates are offering a fully function; that is the reason why you mounted the two black switches above the lower station chair leading bars.

Nb.: Your two grey - black steel tube chairs in the background doesn´t look to be really comfortable...:mrgreen:

Re: Model-4CLF Cresta Bianca

Verfasst: 01.07.2013 - 11:25
von Mr.MarcoPelle
Hi to all!

Here are both stations finished!

Valley station:

Bild

Bild

Mountain station:

Bild

Bild

Presently I'm waiting to build the slope and the place where my model will "live". 3D final project of 2.5m of length:

Bild

Re: Model-4CLF Cresta Bianca

Verfasst: 01.07.2013 - 12:25
von margau
Good work! But i would Marke the Glasses in the Mountains Station stärker.

Re: Model-4CLF Cresta Bianca

Verfasst: 01.07.2013 - 12:34
von Petz
@margau; i think if Marco would use a stronger plastic plate it would be impossible to bow it in the necessary curving.
@Marco, looks great...:ja: :!:

Re: Model-4CLF Cresta Bianca

Verfasst: 01.07.2013 - 12:47
von Mr.MarcoPelle
Yes, my platic plate is 1mm thick and it is very strong. I would like to build a new roof for the station, but I will do it next year otherwise I will lose time to be ready for winter season 2013/2014 :ja:
Thanks for compliments :wink:

Re: Model-4CLF Cresta Bianca

Verfasst: 01.07.2013 - 12:54
von margau
Fucking autocorrector! I Mean darker and not bigger!